fantasticwoodworking
Pup on Parade Intarsia Pattern
Pup on Parade Intarsia Pattern
Couldn't load pickup availability
A straight forward project that benefits from careful timber selection. With a bit of imagination timbers with an "oaky" grain enhance this pups hairy coat.
If you make this project in combination with the Gentle Foal you can set up a nice intarsia with the pup holding the foals lead in its mouth.
This comprehensive, full size, pattern will take you step by step through the construction process.
Finished Intarsia Size:
240mm x 300mm (10" x 12")
Number of Pieces:
43
Plan Size:
A3 420mm x 297mm (17" x 12")
This is a small section of the very detailed computer drawn plan that will guide you through the construction process
Some Sample Timbers used in this piece
 Beefwood |
 Satin Oak |
 Quandong |
 Rosewood |
Use these samples as a guide to colours only. You should use wood that you can easily obtain locally.
The pattern includes detailed guidelines on choosing suitable timbers. Need more timber colours? Check out our guide to Ebonizing and Bleaching Timber here.
